Robot is a device of automaticperformance.It can accept human guidance, run a pre- choreographed program, andact in accordance with principles developed by artificial intelligence. Itstask is to assist or replace human at work, e.g, production, construction, ordangerous work,etc.
The arm of robot is usually openconnecting link mechanism. Typical arm structure include linear and rotarymotion structure and joint structure. Among them, the linear motion structure ofthe arm is often directly driven by cylinders.
Material;45# Steel
tempered hardness：HB230-280
Externaland end face turning
semi-finishing：YBC152/CNMG120408-DM
Vc=180m/min，fr=0.25mm/r
finishing：YBC152/CNMG120408-DF
Vc=200m/min，fr=0.08mm/r
Ball nose and end face turning
semi-finishing：SRGCR2020K10
Vc=180m/min，fr=0.25mm/r
finishing：QXHD2020L04-45
YBG302/ZRHD05-EG
Vc=200m/min，fr=0.08mm/r
Finish turning outer groove
QEGD2020L22
YBG302/ZTGD0404-MG
Vc=150m/min，fr=0.08mm/r
finish turning internal holeΦ28
S20Q-SCLCR09
YBG202/CCMT09T304-HF
Vc=200m/min，fr=0.08mm/r
Drilling hole 8-Φ13
1534SU03-1300
Vc=100m/min，fr=0.15mm/r
Finish milling four sides and grooves
EMP01-025-G25-AP11-03
YBC301/APKT11T304-PF
Vc=200m/min，fz=0.12mm/z
Milling thread holeΦ27
ZTD03-270-XP25-SP07-02
YBG212/SPGT07T308-PM
YBG205/SPGT07T308-PM
Milling thread M27*2
4111-M16
Vc=40m/min，fr=0.4mm/r
Drilling holeΦ8
1588SL12C-0800
Vc=100m/min，fr=0.15mm/r
